This section describes how to create video capture minidrivers, which follow the Windows Driver Model (WDM) architecture. It assumes familiarity with concepts discussed in Kernel Streaming. For information on creating a minidriver for audio-only devices, the Audio devices Design Guide. Resolve Windows 10 related issues for your HP computers or printers by HP Windows 10 Support Center. After you install 7-zip, download, save, but don't run that driver file I posted again. Right click on sp45500 and select 7-zip from the list. Have 7-zip Extract to: and let it extract the file into its folder name.
-->This test validates the selected camera (hw and driver) is compatible with Windows Media Foundation
Test details
| Specifications |
|
| Platforms |
|
| Supported Releases |
|
| Expected run time (in minutes) | 15 |
| Category | Scenario |
| Timeout (in minutes) | 60 |
| Requires reboot | false |
| Requires special configuration | false |
| Type | automatic |
Aos Hv3150uc Capture(04/16/2009) Driver Download For Windows 10 Bit
Additional documentation
Aos Hv3150uc Capture(04/16/2009) Driver Download For Windows 10 32-bit
Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):
More information
Parameters
| Parameter name | Parameter description |
|---|---|
| WDKDeviceID | Device id of DUT |
| DriverVerifierExcludedFlags | Driver Verifier flags that may be manually excluded for the test run |
Troubleshooting
For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.
Intel® Quick Sync Video Encoder
To use Intel® Quick Sync Video encoder, you have to activate the Intel Quick Sync Video by connecting a video cable to the monitor(s) or adding a display device.
Windows 7, 8 and 10 users
Aos Hv3150uc Capture(04/16/2009) Driver Download For Windows 10 64-bit
You can activate the Intel Quick Sync Video by connecting a video cable to the monitor(s).
1) Single monitor: Activate the Intel Quick Sync Video by connecting the mainboard and monitor like below:
2) Dual monitor: Activate the Intel Quick Sync Video by connecting the mainboard and monitor like below:
Windows 7 and 8 users
You can activate the Intel Quick Sync Video by adding the display device
Aos Hv3150uc Capture(04/16/2009) Driver Download For Windows 10 Pro
Right-click anywhere on the desktop and select 'Screen resolution'
Click the 'Detect' button, then click the 'Another display not detected' button, choose the 'Intel(R) HD Graphics' option from Display, and finally select 'Try to connect anyway on: VGA' from Multiple displays:
- If you cannot find the 'Intel(R) HD Graphics' option, please see the 'FAQ' at the bottom of this page for further assistance.Select 'Extend these displays' from Multiple displays, and click [OK].
Start Bandicam, and choose the 'HEVC (Intel Quick Sync video)' or 'H.264 (Intel Quick Sync video)' option.
- H.264/HEVC is one of the most commonly used formats for the recording, compression, and distribution of high definition video. (View the comparison of video codecs of Bandicam)- VBR (Variable bitrate) - Quality-based: VBR allows a higher bitrate for faster scenes and a lower bitrate for slower scenes, as a result, the recorded video size can be made smaller. (Recommended)
- CBR (Constant Bitrate) - Bitrate-based: CBR always uses the same bitrate, as a result, you can predict the video file size (But, the recorded video size might be larger.)
- Keyframe interval: If you choose '150' as the Keyframe interval, keyframes will be created every 150 frames.
- FourCC code: To play the recorded video on media players, choose 'H264'. To edit the recorded video with Sony Vegas, Adobe Premiere with the AVI container, choose 'X264'. » See more
